Prinergy Training

Space shortcuts

Page tree

  1. In the 1-Up Artwork pane, right-click No Curve.p1.pdf and, from the Refine option, select the second Refine > 2ndRef-MapColorsTrap process template.
  2. In the Start Process dialog box, click Edit Process Template.
  3. Expand the Spot Color Handling area.
  4. Check the Enable Spot Color Mapping box.
  5. Select Don't Map Spot Colors.
  6. In the Source of Color Recipes area, locate and select your XXColorLibrary in the Selectable list. Click Add.
 
    Your library has been added to the Selected list, making it available for the 2ndRef-MapColors process template.
    Note: Editing this process template is temporary. When you modify a process template in this way, any changes to the process template are discarded when the process is complete. The changes do not affect the original process template and are not saved with the job. You cannot repeat this process without making the same changes to the process template again.
  7. Expand the Trap area and perform one of the following actions:
    • Use the default settings in the 2ndRef-MapColors process template.
    • Select options specified by your instructor.
  8. Click OK.
  9. In the Start Process dialog box, click Color Mapping to open the dialog box.
  10. Select Dieline in the color table, and in the Color Information section, select the Output tab. Click Add.
  11. In the Select Color Library dialog box, select XXColorLibrary and Job (XX_Automatic_Trapping), and click OK.
  12. In the Color Editor-Dieline dialog box, select Dieline in the Opacity list and set magenta color to 100%. Click OK.
  13. In the Color Mappings dialog box, select Spot Red in the color table, and in the Color Information section, click Add.
  14. In the Select Color Library dialog box, select XXColorLibrary and Job (XX_Automatic_Trapping), and click OK.
  15. In the Color Editor–Spot Red dialog box, select Normal in the Opacity list and set magenta to 90% , yellow 55%, and black 25%. Click OK.
  16. In the Color Mappings dialog box, click OK to complete all color mapping.
  17. In the Start Process dialog box, click OK to begin the refine process.
  • No labels