- Click the Materials button, and then click the Press tab.
- Click the Arrow list on the upper right corner of the palette.
- Select New and enter the following:
- Name: Press 1
- Units: inches/mm
- Setback: 1"/ 25.4 mm
- Gripper: 0.75"/ 19.1 mm
- Plate Bend: 1"/ 25.4 mm
- First Knife: 0
- Click Create.
- Select New.
- Name: Press 2
- Units: inches/mm
- Setback: 0.625"/ 15.9 mm
- Gripper: 0.5"/ 12.7 mm
- Plate Bend: 0.625"/ 15.9 mm
- First Knife: 1
- Click Create.
- Select New.
- Name: Press 3
- Units: inches/mm
- Setback: 0.75"/ 19.1 mm
- Gripper: 1.5"/ 38.1 mm
- Plate Bend: 0.75"/ 19.1 mm
- First Knife: 1.5
- Click Create.
- From the Pandora software menu (Mac computer), select Quit Pandora to exit the Pandora software.
Overview
Content Tools