- Select the 1-up artwork that was added to the layout view in Task 3 (Add and Position Artwork). From the Object menu, select Step and Repeat.
- In the Step and Repeat dialog box, go to the Steps area and select:
Repeat Horizontal = 2; vertical = 9
Gap = X=0; Y=0
Click OK. - Select the Bleed Tool icon on the top toolbar. The ruler bar turns red, meaning Pandora is in Bleed edit mode.
- Select both artworks of the bottom row using Shift + Click. On the lower panel of the Geometry palette, set the bottom bleed margin to 0.125" or 3.18 mm.
- Select both artworks of the top row using Shift + Click. On the lower panel of the Geometry palette, set the top bleed margin to 0.125" or 3.18 mm.
- Select all the artworks of the left column using Shift + Click. On the lower panel of the Geometry palette, set the left bleed margin to 0.125" or 3.18 mm.
- Select all the artworks of the right column using Shift + Click. On the lower panel of the Geometry palette, set the right bleed margin to 0.125" or 3.18 mm.
- Select the Selection Tool (arrow) icon on the top toolbar. The ruler bar turns black, meaning Pandora is in Normal edit mode.
Overview
Content Tools