Note: Support for the original i1Pro and i1iO has been discontinued by X-Rite. These first-generation devices are no longer supported by Kodak Proofing Software. They may continue to work, but replacement with a newer model is recommended.
- X-Rite i1 Pro2 and i1 Pro3 Spectrophotometers (Note: i1 Pro3 Plus Spectrophotometer is NOT qualified, and first-generation i1 Pro (UV or non-UV) is EOSL.)
- X-Rite i1 iO Table with i1 Pro2 or Pro3 Spectrophotometer (Note: i1iO3 Plus Table is NOT qualified, and first-generation i1 Pro (UV or non-UV) is EOSL.)
- X-Rite iSis and iSis2 Spectrophotometer
- X-Rite iSis and iSis2 XL Spectrophotometer
Kodak continues to maintain software compatibility with these instruments where applicable.
Manufacturer | Device Family | Model | Manufacturer Status | End of Sale | End of Support / Service |
X-Rite | i1Pro / i1iO | i1Pro 2 / i1iO 2 | Discontinued | – | Jan 31 2025 |
i1Pro 3 / i1iO 3 | Active | – | Ongoing | ||
i1iSis Family | i1iSis / i1iSis XL | Discontinued | – | No longer supported | |
i1iSis 2 / i1iSis 2 XL | Active until EoS | Aug 21 2025 | Before Sept 1 2028 |
- Customers should note that manufacturer support timelines are independent from Kodak’s ongoing software support.
- Some instruments have reached or will soon reach End-of-Support from their manufacturers.
- Customers should consult their hardware providers for service, calibration, or replacement options once manufacturer support has ended.
- Kodak will provide additional information regarding potential replacement devices.