1. Change the Current Item to Die_1
2. In the S&R dialog box, set the following values:
   • Offsets: H = 10.125 W = 0 inch
   • Gaps: H = 2.66262 inch (67.63 mm) W = 0
   • Repeats: 2 x 7
   • Rotation: 90°
   • Click Add.
3. On the S&R tab, enter the following values:
   • Offsets: H = 14.96054 inches W = 1.20885 inches
   • Gaps: H = 0 W = 0
   • Repeats: 1 x 6
   • Rotation: 270°
   • Click Add.
4. Click the Station tab and from the list, select the first one identified with Die_1 (should show as Die_1, 0.00000,0.00000, 0).
5. Confirm that station 9 is selected in the layout view and click Remove.
6. Zoom out to view the layout.
7. From the CAD Correct menu, select Adjust Sheet Sizes.
8. From the CAD Correct menu, select Clean CF2.