1. Duplicate 1-up artwork by two to form a row.
   Select the 1-up artwork. From the Object menu, select Duplicate.
2. In the Steps area of the Duplicate dialog box, select:
   • Repeat: 2 and the horizontal arrow
   • Gap = 0 in
   • Click OK.
3. Adjust Specific Left / Right Bleed Margins
4. Show the Geometry palette and click the arrow head to expand the Bleed section.
   1. Select the left 1-up artwork, and set the left bleed margin to 0.125" or 3.18 mm.
   2. Select the right 1-up artwork, and set the right bleed margin to 0.125" or 3.18 mm.
5. Duplicate 1-Ups Artwork Row by 9 - Total of 18
6. Select both copies of artwork in the layout. From the Object menu, select Duplicate.
7. In the Steps area of the Duplicate dialog box, select:
   • Repeat: 9 and the vertical arrow
   • Gap = 0 in
   • Click OK.
8. Adjust Specific Top / Bottom Bleed Margins
9. Select the top-left 1-up artwork.
10. On the Geometry palette, set the top bleed margin to 0.125" or 3.18 mm. Repeat this with the top-right 1-up artwork.
11. Select the bottom-left 1-up artwork.
12. On the Geometry palette, set the bottom bleed margin to 0.125" or 3.18 mm. Repeat this with the bottom-right 1-up artwork.
13. Perform the same steps that you just performed but select the top-right and bottom-right 1-up artworks.