On Epson Stylus Pro x900/x890 printers that use an inline spectrophotometer

Always perform this procedure after loading a roll of media or changing the paper, before running a Certified Process for Color Confirmation job, and after replacing or upgrading the spectrophotometer.

1. On the front panel of the printer, press the Menu button.
2. Select Options Setup > Spectro Proofer > Device Alignment > Execute.
3. Press OK to save the setting.
4. Restart the printer. (Turn it off and then on again.)

On Epson SureColor P6000, P7000, P8000, and P9000 printers that use an inline spectrophotometer

Always perform this procedure after loading a roll of media or changing the paper, before running a Certified Process for Color Confirmation job, and after replacing or upgrading the spectrophotometer.

1. On the front panel of the printer, press the Menu button.
2. Select Options Setup > Spectro Proofer > Sproofer Setting > OK to start calibration.
3. Restart the printer. (Turn it off and then on again.)