View Source

Supported servers

Prinergy Evo Workflow 9.0 Server software requires one of the following operating systems on one of the following Dell platforms or within a Kodak-qualified VOE host (VMware ESXi 6.5 and higher, Hyper-V 2012 and higher) using a Kodak-supplied VM image. Other servers and Dell OptiPlex workstations are not supported.

Windows Server 2019
Windows 10 Professional x64

Note: Prinergy Evo may be installed on Kodak-supplied base VM images, but is not available pre-installed on Kodak-supplied VM images.

Microsoft Windows Server 2019

New customers will use Windows Server 2019.

Gen 13/14 Premium or High-Performance Servers	Dell PE T630/R730 Dell PE T640/R740
Gen 13/14 Performance Plus Servers	Dell PE T330 Dell PE T340
Gen 13/14 Performance Servers	Dell PE T330 Dell PE T340

Microsoft Windows 10 Professional x64 Requirements and Microsoft Windows 2019 x64 Requirements

Prinergy Evo 9.0 is supported on user-supplied platforms running Windows 10 Professional 64-bit or Windows 2019, with the following requirements:

Processor: 1 gigahertz (GHz) or faster Intel i5 or i7 processor, with a minimum of 4 cores.
RAM:12 GB or better
Hard disk space:120 GB minimum
Graphics card: DirectX 9 or later with WDDM 1.0 driver
Display: 1024-by-768 resolution
Localization: English (non-English localizations and editions of Windows are not supported on customer-supplied platforms)
Installation Type: Fresh install of either Windows 10 Pro x64 or Windows 2019.

Additional Configuration Settings

Apply latest Microsoft patches to the Windows OS and keep them up to date using normal methods.
Install Java 1.8
Review the Requirements for installing and running Prinergy Evo Workflow 9.0 topic in the Prinergy Evo System Administrator Guide.
Make sure the Windows OS has internet access in order to download Windows updates and other software used by the Prinergy Evo Server software, including .NET updates that may be required during the installation process.

Requirements to enable Kodak remote support

Contact Kodak your Kodak customer support representative to assist with configuring Kodak's RSS remote support software and enable remote access.

Kodak makes no claims or guarantees related to performance on customer-supplied hardware and operating systems

In cases where a customer has chosen to acquire their own hardware and/or operating system, the customer is responsible for installing and configuring Prinergy Evo on their own supplied hardware. RSS is available for customers to install as a support product from Kodak.