If you are using the SMB file-sharing protocol, use this example to configure a share on a UNIX server.
You can set up one or more shares on a single physical volume, unlike the folder structure on a Prinergy server that uses the Windows operating system.
This example is the smb.conf file from Samba 3. For full details about each configuration parameter, see the Samba documentation at http://www.samba.org.
Notes:
- Do not modify the parameters that are in bold type. These must be set correctly for Prinergy to function. It is possible to modify other settings or add other settings, but do so at your own risk.
- The NetBIOS name must be all uppercase.
- If you find performance to be slow, changing the protocol may improve performance. Change the three protocol lines as indicated below.
# Samba config file created using SWAT# from 10.1.66.51 (10.1.66.51)# Date: 2004/05/04 08:55:15# Global parameters[global] workgroup = MYWORKGROUP netbios name = CREOLINUX server string = %h server (Samba %v) encrypt passwords = Yes update encrypted = Yes map to guest = Bad User obey pam restrictions = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n. syslog = 0 log file = /var/log/samba/log.%m max log size = 50 protocol = LANMAN2 max protocol = LANMAN2 min protocol = LANMAN2 time server = Yes UNIX extensions = Yes mangling method = hash2 preferred master = No local master = No domain master = No browse list = No enhanced browsing = No dns proxy = No invalid users = root create mask = 0777 case sensitive = No# Example shared volumes. Prinergy requires the# AraxiVolume_xxx naming format to use the # shared# volume as a job share.[AraxiVolume_P3Linux_18gb] comment = 18GB Volume on P3Linux path = /18gb read only = No[AraxiVolume_P3Linux_36gb] comment = 36GB Volume on P3Linux path = /36gb read only = No