...
| language | en |
|---|
The Pandora software includes two color bar marks that are tiled horizontally across the width of the substrate, stopping 0.125 in. / 3.17 mm from each edge. These color bars are centered horizontally on the substrate, 9 points from the top edge. Their width is the full sheet width minus 49 points on either end.
| Uses the first four colors in the job. Appropriate for most process color jobs. |
| Uses the first six colors in the job. Appropriate for six-color jobs. |
The Pandora software can split a SmartMark color bar into multiple parts and position the parts wherever there are gap areas in the die—at the top, middle, or bottom, nested between die stations. Placement depends on the size of the die. The color bar swatches remain in sequence so that the ink key scanner works correctly. This flexibility in color bar placement allows you to minimize waste by using smaller substrate sizes, allowing for more cost-effective press runs. See Converting a SmartMark Color Bar to a Split Color Bar.
Note: On two-sided layouts, split color bars are placed only on the front side.
If you do not want to create your own split color bars, the SmartMark folder includes these samples that you can use.
CB_SplitAllGaps.pdf | A split color bar that uses the first six colors in the job and is placed in all gap areas of the die. |
CB_SplitTopGaps.pdf | A split color bar that uses the first six colors in the job and is placed in the top gap areas of the die. |
CB_SplitCenterGaps.pdf | A split color bar that uses the first six colors in the job and is placed in center top gap areas of the die. |
CB_SplitBottomGaps.pdf | A split color bar that uses the first six colors in the job and is placed in the bottom gap areas of the die |
...
| language | zh |
|---|
Pandora 软件包括两个颜色条标记，沿着承印物的宽度方向水平层叠，止于距离每个边缘 0.125 英寸/3.17 毫米处。这些颜色条在承印物上水平居中，距离顶部边缘 9 磅。它们的宽度是全印张宽度在两端各减去 49 磅。
...
CB_4-color.pdf
...
使用作业中的前四种颜色。适用于大多数原色作业。
...
| . |
...
使用作业中的前六种颜色。适用于六色作业。
Pandora 软件可以将一个 SmartMark 颜色条分割成多个部分，并确定各部分的位置，只要刀版中有空隙区域，无论在顶部、中间、底部，还是嵌在刀版台之间。放置位置取决于刀版的大小。颜色条样板按顺序留置，以便墨键扫描器正常工作。利用颜色条放置的这种灵活性，通过使用较小的承印物尺寸，可以最大程度地减少浪费，实现更经济高效的印刷运行。请参阅 Converting a SmartMark Color Bar to a Split Color Bar。
注意：在双面版式上，分割颜色条仅放置在正面。
如果您不想创建您自己的分割颜色条，SmartMark 文件夹包括了您可以使用的以下样例。
...
一个使用作业中前六种颜色的分割颜色条，放置在刀版的所有空隙区域。
...