...
| language | en |
|---|
The Create Dummy Artwork dialog box lets you specify a name and the trim box dimensions for an artwork that is still in the planning stages. You can use this placeholder when the customer artwork is not available or if the artwork will be added by a workflow system downstream. The placeholder can be swapped later in the production cycle with the 'live' artwork.
- Select Object > Create Dummy Artwork.
- Select the Unit of measure.
- Type a name for the Dummy Artwork.
Note: if the name has already been used, a warning message appears. Choose an alternate name for the Artwork file.
- In the trimbox area, type the width and height dimensions required.
- Click Create.
The artwork is added to the Content tab in Job Properties.
Tip: This artwork can now be used to create a Step-and-Repeat. If using a Prinergy Workflow, print the layout to PJTF - Kodak Prinergy. The layout with the dummy artwork can be imported and the live production artwork can then be assigned to the artwork set when it is refined.
...
| language | zh |
|---|
您可以使用“创建虚拟页面”对话框，为仍处于计划阶段的页面指定名称和净尺寸框尺寸。 当客户页面不可用或者通过下游工作流程系统添加页面时，您可以使用此占位符。 占位符随后可以在生产周期与“实时”页面进行交换。
- 选择“对象 > 创建虚拟页面”。
- 选择“度量单位”。
- 键入虚拟页面的名称。
注意：如果该名称已被使用，将显示一条警告消息。 选择页面文件的备用名称。
- 在“净尺寸框”区域中，输入所需的宽度和高度尺寸。
- 单击“创建”。
页面将会添加到“作业属性”的“内容”选项卡。
...