Page History

...

You can import the artwork into job properties at any time. When you drag the artwork to the layout view, make sure that the die stations are selected so that the artwork can snap to the die. If individual die stations are detectable in the die file and if the artwork contains a spot color die line the same size as the target die station, the software can automatically snap the artwork to the die. The artwork snaps to the center of the die line or trim box depending on the setting under Snap Artwork to Die. Otherwise, you can manually align the artwork to the die.
Note: The artwork must be unlocked so that it can snap to the die.

The bleed offset is automatically generated when the artwork snaps to the die.

1. Import the die.
   The die appears in the layout view.
2. Click one or more target die stations or the die layout to select them. To select multiple stations, hold down the Shift key as you click each station, or drag a marquee around the stations.
3. Drag the artwork from the Content tab of job properties to the layout view.

...

可以随时将页面导入到作业属性中。 将页面拖入版式视图时，请确保刀版台处于选中状态，以便页面能对齐到刀版。 如果能在刀版文件中检测到单个刀版台且页面包含与目标刀版台相同大小的专色刀版线，那么 Pandora 软件可自动将页面对齐到刀版。 页面会根据将页面对齐到刀版下的设置对齐到刀版线或净尺寸框中央。 另外，也可手动将页面对齐到刀版。
注意：必须取消页面的锁定，才能将其对齐到刀版。

出血偏移量是在页面对齐到刀版时自动生成的。

...