...
| language | en |
|---|
Each job can include one or more dies. Supported formats are DXF, CFF2, and DDES2.
Note: To control the placement of more than one die on the layout, set the preference for Multiple Die Align.
- Select File > Import > Die.
- In the Import Die dialog box, browse to the location of the die file, select the file, and then click Open (Macintosh) or Import (Windows).
The die appears in the Die folder on the Content tab of job properties, and is automatically centered on the substrate or pasteboard if you only add one die; if you add more than one die, the preference setting that you selected for multiple die align will be used.. - If the Geometry palette is not currently shown, select Window > Show Geometry Palette.
For dies that contain more than one station, all the die stations are selected by default. The current coordinates are shown on the Geometry palette. The die moves only as a unit; you cannot move individual die stations. You can, however, deselect a die station within the die by holding down the Shift key and clicking the station. - In the X and Y boxes of the Geometry palette, type the coordinates of the position to which you want to move the die.
You can also position the die by dragging it into place, or by using the arrow keys to nudge it into place. You can drag guides from the rulers to help position the die precisely.
Note: The default nudge distance is one point. You can change the distance setting in Preferences.
For the one or more dies that you imported when you access the Content tab in job properties, the Attributes section at the bottom of the tab displays the Filename, the Total stations in the die, and the Mirror status. The Numbering tab displays the Number order, Starting point, Direction, and Starting #.
...
| language | zh |
|---|
每个作业可以包括一个或多个刀版。支持的格式为 DXF、CFF2 和 DDES2。
注意：要控制多个刀版在版式上的布局，请设置首选项 Multiple Die Align。
- 选择“文件 > 导入 > 刀版”。
- 在“导入刀版”对话框中，浏览至刀版文件的位置，选择该文件，然后单击打开 (Macintosh) 或导入 (Windows)。
刀版显示在作业属性的内容选项卡上的 Die 文件夹中，且自动居于承印物或剪贴板中央（如果您仅添加一个刀版）；如果您添加多个刀版，将使用您为多个刀版对齐选择的首选项设置。 - 如果当前未显示图形面板，请选择窗口 > 显示图形面板。
对于包含多个刀版台的刀版，默认情况下已选中所有刀版台。在“图形”面板中显示当前坐标。刀版只能作为一个整体移动；不能移动单个刀版台。但是，可以通过按下 Shift 键并单击刀版台来取消选中刀版内的某个刀版台。 - 在“图形”面板的 X 和 Y 框中，输入刀版将要移至的位置坐标。
也可通过将刀版拖入到相应位置或通过使用箭头键将其微移入相应位置来定位刀版。可从标尺中拖动拉规以帮助精确定位刀版。
注意：默认微移距离是 1 个点。可以在“首选项”中更改距离设置。
...