Page History

...

You can have the Pandora software automatically size substrates according to job elements (die, plate, film, or step-and-repeat), plus margins that you specify.

Important: Confirm that the settings in Preferences > Substrate Tab for using Automatically Sized Substrates are already configured.

1. In Preferences, select the element (or elements) to which you want the substrate sized.
2. Import a die, or drag a plate or film from the ShopMap palette into the job. The die, plate, or film automatically appears in the layout view.
   • If you selected Always create substrate with these default settings in Preferences, the substrate automatically appears.
   • If you cleared Always create substrate with these default settings in Preferences, modify the substrate using the settings in steps 3–5.
3. In the Width and Height area, type the dimensions of the substrate.
4. (For die only) In the Size Based On area:
   • Select All lines in die file to base the die size on the outermost lines in the die.
   • Select All die stations to base the die size on the all the stations in the die.
   • Select Line type to specify a line type to use to size the die.
5. In the Margins area:
   1. Type an amount for the margins. The substrate cannot be larger than 482.6 x 482.6 cm (190 x 190 in.).
   2. If you want a die centered on the substrate, select Center die on substrate. If you want the plate or film centered, select Center substrate horizontally.
   3. Select a grain for the substrate: Long, Short, or None.
   4. In the Units list, select millimeters, centimeters, or inches.
6. Click Yes.
   The job element appears on the layout with a substrate.

...

您可以使 Pandora 软件根据作业元素（刀版、印版、胶片或多重拼贴）以及您指定的页边空白，自动缩放承印物。

重要提示：确认“首选项 > 承印物”选项卡中的使用“自动缩放承印物”已配置。

...

• 如果在“首选项”中选择了“始终用这些默认设置创建承印物”，将自动显示该承印物。
• 如果在“首选项”中清除了“始终用这些默认设置创建承印物”，请使用步骤 3-5 中的设置修改承印物。

...

• 选择“刀版文件的所有线条”，使刀版大小基于刀版中最外面的线条。
• 选择“所有刀版台”，使刀版大小基于刀版中的所有刀版台。
• 选择“线类型”，指定用于缩放刀版的线类型。

...

1. 输入页边空白量。 承印物不能大于 482.6 x 482.6 厘米（190 x 190 英寸）。
2. 如果希望刀版在承印物上居中，请选择“将刀版置于承印物中央”。 如果希望印版或胶片居中，请选择“承印物水平居中”。
3. 选择承印物纹理：长、短或无。
4. 在“单位”列表中，选择毫米、厘米或英寸。

...