Page History

...

Important: The settings in Preferences > Automatically Sized Substrates > FlexoPlate must already be configured. When this selection is used, the other Auto Sized Substrate options are cleared and inactive. 

1. Drag a new substrate from the ShopMap palette into the job.
   A warning appears:There is already a substrate in the job. Do you want to replace it? 
2. Click Replace.
   The Create Plate dialog box appears.
3. In the Replace Plate dialog, perform these actions in the Height and Width area:
   1. If you do not want to accept the defaults, type the dimensions of the plate required.
   2. In the Units list, select millimeters, centimeters, or inches.
4.  Click Yes.
   The new flexo plate replaces the existing flexo plate on the layout. 

Note: If a Press has been attached to the substrate, there will be a warning message:

...

重要提示：>必须已配置“Automatically Sized Flexo Plate based on Substrate”中的设置。 当使用此选项时，其他“自动缩放承印物”选项将处于未选中和非活动状态。 

1. 将新的承印物从 ShopMap 面板拖到作业中。
   显示警告：There is already a substrate in the job. Do you want to replace it? 
2. 单击“替换”。
   随即显示“创建印版”对话框。
3. 在“替换印版”对话框中，在“高度和宽度”区域执行以下操作：
   1. 如果您不想接受默认值，请输入所需的印版尺寸。
   2. 在“单位”列表中，选择毫米、厘米或英寸。
4.  单击“是”。
   新的柔性印版会替换版式上的现有柔性印版。 

...

Auto Flexo Plate selected, but a Press has been attached to substrate. All Press offsets will be ignored.