Page History

...

You can configure Pandora software to automatically size a flexo plate based on margins that you specify when a substrate is added to the layout. The software will prompt you to accept the pre-defined flexo plate size based on the default margins you configured or you can enter new dimensions for height and width of the flexo plate. See also Replacing existing flexo plate using Auto Sized Flexo Plate.

Note: When Auto Flexo Plate is selected, all other ASPS settings (including Plate) are deselected and inactive. If a Press has been attached to a substrate, there will be a warning message: Auto Flexo Plate selected, but a Press has been attached to substrate. All Press offsets will be ignored.

1. Select Pandora > Preferences (Macintosh) or Edit > Preferences (Windows).
2. In Preferences, select the Substrate tab.
3. In the Automatically Sized Substrate area, select FlexoPlate.
4. In the Create Auto Flexo Plate area, perform the following actions:
   1. In the Units list, select millimeters, centimeters, or inches.
   2. Type an amount for wider than substrate.
   3. Type an amount for taller than substrate.
      Note: Margins will be displayed as Read-Only values. Center substrate horizontally and Center substrate vertically are auto-selected and are Read-Only values also. 
5. Click OK. 

...

当将承印物添加到版式中时，您可以配置 Pandora 软件根据您指定的页边空白自动缩放柔性印版。 软件将提示您接受根据您配置的默认页边空白预定义的柔印版，您也可以输入柔性印版的宽度和高度新尺寸。 另请参见 Replacing existing flexo plate using Auto Sized Flexo Plate。

注意：当选中“自动创建柔性印版”时，所有其他 ASPS 设置（包括“印版”）将处于未选中和非活动状态。 如果印刷机已连接到承印物，则会显示一条警告消息：Auto Flexo Plate selected, but a Press has been attached to substrate. All Press offsets will be ignored.

...

1. 在“单位”列表中，选择毫米、厘米或英寸。
2. 输入比承印物更宽的宽度值。
3. 输入比承印物更高的高度值。
   注意：页边空白将显示为只读值。 “承印物水平居中”和“承印物垂直居中”也将自动选中并为只读值。 

...